View Cart
New

AE 100 PU foam Spray Sealant

Special Price 4,275.00

Per Piece Cost : 285
No of Piece : 15

Product Description

    Product Description

AE-100  PU FOAM is a one component, multipurpose polyurethane foam. This is cured by air humidity and it having high adhesion strength. This product free from CFC and environment friendly.

Technical Data


Type

Polyurethane

Tack Free  

After ± 10 min (at +23°C, 50% RH)

Can be cut

After ± 20 min (at +23°C, 50% RH)

Tensile Strength

9-10 N/cm²

Stability load bearing

After ± 12 hours (at +23°C, 50% RH)

Box Yield 

750 ml yields ca. 35 L of foam

Fire rating

B3

 

 

Water absorption

1 % volume

Temperature resistance

-40 °C till +90 °C (cured)

       Colour                                                                         Beige         

Features  & Benefits

  Single component

Excellent resistance to water, oil, acid, solvent

Eliminates vibration, reduce noise

High adhesion strength

Applications

AE 100 PU Foam  is ideal for back filling, sealing, bonding and isolation.

Filling of joints, seams and cracks in:

- partition walls with ceilings

- structural space between window- and door frames and walls

- structural and fitting space between prefabricated construction elements

- around cables and pipes, penetrations through walls and ceilings

- gluing panels/ insulating sheets

Industry

Construction : Fitting Door frames , window frame gaps, sealing tie rod holes/joints , gap between bricks and  beam, bonding AAC blocks

Power plants : sealing gap between cable and wires , gap between electric panel outlet

Solar Plants :  sealing gap between cable and wires

Interiors : Gap filling

Wooden houses : gap filling

Application Procedure

Shake the aerosol can for at least 20 seconds. Put the adapter/ Gun on the valve. Moisten surfaces with a water sprayer prior to application. Remove pressure from the applicator to stop. Fill holes and cavities for 50 %, as the foam will expand.

Repeat shaking regularly during application. If you have to work in layers repeat moistening after each layer.

Shelf life

12 months from the month of manufacture.

Precautions

  1. Use with proper ventilation. Avoid direct contact with skin and eyes.
  2. If contact with skin occurs, rinse with warm water.
  3. If AE PU FOAM-100 gets into eye, keep eye open and rinse thoroughly. Seek medical attention  immediately.
  4. Keep out of reach of children.

Storage:

Store product in the unopened container at 20°C. Storage information may also be indicated on product container labeling.

Optimal storage: Store at 30ºC.

For safe handling information on this product, consult the Material Safety Data Sheet (MSDS).

Packing: This material is packed in 750 ml aerosol can and 15 nos per box.

 

Insulating foam sealants are useful for sealing holes, gaps and cracks around your home where air leakage could occur. Some possible areas to consider sealing around include:

  • Window and door gaps
  • Baseboards and vents
  • Sill plates, pipe and duct penetrations
  • Sink plumbing, floor/wall junctions, around electrical boxes (not inside)

Exterior uses could include the following:

  • Where the siding meets the foundation
  • Gas and electrical penetrations
  • Garage ceiling and wall joints
  • Around outdoor faucets and exterior vents
  • Landscaping applications such as stone wall repair, pond/waterfall fillers and repair, as well as to secure landscape blocks

 

AE 100 PU Foam  is ideal for back filling, sealing, bonding and isolation.

Filling of joints, seams and cracks in:

- partition walls with ceilings

- structural space between window- and door frames and walls

- structural and fitting space between prefabricated construction elements

- around cables and pipes, penetrations through walls and ceilings

gluing panels/ insulating sheets

 

Industry  

Construction : Fitting Door frames , window frame gaps, sealing tie rod holes/joints , gap between bricks and  beam, bonding AAC blocks

Power plants : sealing gap between cable and wires , gap between electric panel outlet

Solar Plants :  sealing gap between cable and wires

Interiors : Gap filling,

Terrace - heat insultation 

Cold Storage/ Wooden houses : gap filling